Please notice: This product is no longer in our inventory. Luckily, we can locate this model or a comparable model for you. Please fill out the form below, and we will activate a search with our team. Once the item is found, a team member will reach out with details and next steps.
Max Spindle Speed | (2) 5,000 rpm |
Thru-Spindle hole dia. | 2.9” |
Milling Spindle | 12,000 rpm |
ATC | 40 |
Turret Positions (Turret 2) | 12 |
Built-in Motor / All live-tooling capable | 6,000 rpm |
Max. Workpiece Swing | 23.6” |
Swing over Cross-Slide (Turret 2) | 13.4” |
Max. Distance between Spindle Large Noses | 49.4” |
Max. Turning Diameter | Tool-spindle Capto C5 = 23.6”, Turret 2 = 8.2” |
Max. Turning Length | 39.4” |
Bar Work Capacity | 2.6” Dia. |
Features:
– Mori MSX-711III Control
– (2) 5,000 rpm Turning Spindles
o Thru-Spindle hole dia. 2.9”
o Minimum Spindle Indexing Angle .0001 deg
– 12,000 rpm Milling Spindle
o 40 Tool Capacity Magazine
o Minimum B-Axis Indexing Angle 1 deg
o 240 Tool offsets
– 12 Station Lower Turret (Turret 2)
o Built-in Motor / All live-tooling capable – 6,000 rpm
o 64 Tool offsets
– LNS Quick Load Servo S3 Barfeed
– Built-in Part Ejection / Auto Parts Catcher / Outfeed Conveyor
– Built-in Tool Presetter
– Thru-Spindle High Pressure / High Volume Coolant
o (2) 1200 psi pumps
– Enomoto BeA Chip Conveyor
– Absolent ODF 2000 Mist Collector
– MAPPS / 3D Interference Check Function
– Machine Simulation Function
– Data server / FTP Function
– Tool Life Management
– Automatic door open/close
– Includes Mori operation manuals / electrical diagrams / others
– Tool-Spindle Head (Head 1): 19300 hours run time, Turret 2 (Head 2): 18216 hours run time
– Also includes 100+ pcs of Sandvik Capto tool holders – over $40,000 value if purchased new.
See table at end of description for full list. Note: Selling only holders themselves with the
machine – does not include collets, inserts, endmills or other universal tooling loaded into the
holders in the photos.
Other Manufacturer Specs:
o Max. Workpiece Swing 23.6”
o Swing over Cross-Slide (Turret 2) 13.4”
o Max. Distance between Spindle Large Noses 49.4”
o Max. Turning Diameter (Tool-spindle Capto C5 = 23.6”, Turret 2 = 8.2”)
o Max. Turning Length 39.4”
o Bar Work Capacity 2.6” Dia.
o X1 Axis Travel (Tool-Spindle Head) 27.0”
o Y Axis Travel (Tool-Spindle Head) +/- 4.9”
o Z1 Axis Travel (Tool-Spindle Head) 42.3”
o B Axis Travel (Tool-Spindle Head) +/- 120 Deg.
o X2 Axis Travel (Turret 2) 5.1”
o Z2 Axis Travel (Turret 2) 38.2”
Rapid Traverse Feedrates:
Machine Mass: Mfr. Spec. 16,500kg
Estimated shipping dimensions:
List of Included Sandvik Capto Tool Holders Included:
QTY | Sandvik Pt. # | Description |
22 | C4-391.14-32 054 | Capto to ER Collet Chuck |
2 | C4-SDUCR-13080-11 | CoroTurn 107 cutting unit for turning |
2 | C4-DTJNR-27050-16 | T-Max P cutting unit for turning |
5 | C4-TLSR-27050-3 | Top Lok cutting unit for parting and grooving |
2 | C4-PCLNR-13080-09 | T-Max P cutting unit for turning |
3 | 880-D1600C4-03 | CoroDrill 880 indexable insert drill |
2 | C4-PCLNR-17090-12 | T-Max P cutting unit for turning |
3 | 880-D2000C4-03 | CoroDrill 880 indexable insert drill |
3 | C5-DTJNR-35060-16 | T-Max P cutting unit for turning |
2 | C4-131-00050-375 | Capto to cylindrical shank adaptor |
2 | C5-ASHR-30098-12-A | Capto to rectangular shank adaptor |
4 | C5-391.01-50 050 | Capto extension adaptor |
1 | C5-DDJNR-35060-11 | T-Max P cutting unit for turning |
13 | C5-391.14-20 100 | Capto to ER Collet Chuck |
9 | C5-391.14-32 057 | Capto to ER Collet Chuck |
3 | C5-391.14-20 055 | Capto to ER Collet Chuck |
2 | C5-DDMNL-00115-15 | T-Max P cutting unit for turning |
2 | C5-DVJNR-35065-16 | T-Max P cutting unit for turning |
2 | C5-TLSR-35060-3 | Top Lok cutting unit for parting and grooving |
2 | 880-D1700C5-03 | CoroDrill 880 indexable insert drill |
2 | C5-391.14-32 100 | Capto to ER Collet Chuck |
3 | C4-570-32-LF | Capto to CoroTurn SL Adaptor |
1 | 570-32R123H18B052B | CoroCut 1-2 head for face grooving |
2 | 570-32R123H18B092B | CoroCut 1-2 head for face grooving |
1 | C4-DDJNR-27050-11 | T-Max P cutting unit for turning |
1 | C5-APBR-31095-21 | Capto to blade adaptor |
2 | C5-ASHR3-36123-12-A | Capto to rectangular shank adaptor |
2 | C5-A391.20-09 055 | Capto to Weldon adaptor |
2 | C5-391.02-32 060A | Capto reduction adaptor |
2 | C3-LF123U06-22045BM | CoroCut 3 cutting unit for parting and grooving |
1 | C5-391.02-40 040 | Capto reduction adaptor |
2 | C5-391.14-25-055 | Capto to ER Collet Chuck |
1 | C5-391.20-19 060 | Capto to Weldon adaptor |