Get a Quote

Please notice: This product is no longer in our inventory. Luckily, we can locate this model or a comparable model for you. Please fill out the form below, and we will activate a search with our team. Once the item is found, a team member will reach out with details and next steps.

2010 Mori Seiki NT-1000SZ

Specifications

Array
(
    [id] => 4169
)
Full Specs Coming Soon

Features

MAX WORKPIECE DIAMETER 14.57″

.SWING OVER CROSS SLIDE 14.57″

.MAXIMUM DISTANCE BETWEEN SPINDLE NOSES 35″

.BW-AXIS MAX. SWING 35.04″

.MAXIMUM TURNING DIAMETER TOOL SPINDLE 14.57″/TURRET 10.63″

.MAXIMUM TURNING LENGTH 16.69″

.BAR WORK CAPACITY 2.05″ OR 2.56″ DEPENDING ON CHUCK CYLINDER TYPE

TRAVEL:

.X1-AXIS TOOL SPINDLE 14.96″

.Y AXIS TOOL SPINDLE 4.13″

.Z1 AXIS TOOL SPINDLE 18.11″ + 6.1″ ATC TRAVEL

.B AXIS TOOL SPINDLE +/- 120 DEGREES

.X2 AXIS TURRET 2 6.10″

.Z2 AXIS TURRET 2 24.01″

.BW AXIS 0 DEGREES PROCESS/-25 DEGREES PROCESS/-90 DEGREES RETRACT/

-180 DEGREES LS LOADER/-225 DEGREES WORKPIECE CONVEYOR

SPINDLE 1:

.SPINDLE SPEED 6,000 RPM

.NUMBER OF SPINDLE SPEED RANGES 2 STEP WOUND ROTOR

.SPINDLE NOSE JIS A2-5

.THROUGH SPINDLE HOLE DIAMETER 2.4″

.MINIMUM SPIDNLE INDEXING ANGLE 0.0001 DEGREES

.SPINDLE BEARING INSIDE DIAMTER 3.94″

.SPINDLE TORQUE 40%ED/30MIN/CONT N.M 223/172/158

SPINDLE 2:

.SPINDLE SPEED 6,000 RPM

.NUMBER OF SPINDLE SPEED RANGES 1

.SPINDLE NOSE TYPE 80g6 FLAT NOSE

.THROUGH SPINDLE HOLE 1.5″

.MINIMUM SPINDLE INDEXING ANGLE 0.0001 DEGREES

.SPINDLE BEARING INSIDE DIAMETER 2.76″

.SPINDLE TORQUE (15%ED/CONT) N.m 49/22

TOOL SPINDLE TURRET 1:

.NUMBER OF TOOLS ON SPINDLE HEAD 1

.MINIMUM B AXIS INDEXING ANGLE 0.0001 DEGREES

.TOOL SPINDLE SPEED 12,000 RPM

.TAPER HOLE OF TOOL SPINDLE C5

.INSIDE DIAMETER OF TOOL SPINDLE BEARING 2.56″

.TOOL MAGAZINE 38 TOOLS

.MAXIMUM TOOL DIAMETER WITHOUT ADJACENT TOOL 5.12″

.MAXIMUM TOOL LENGTH 9.84″ WHEN TOOL DIAMETER LESS THAN 2.756″

-8.27″ WHEN TOOL DIAMETER GREATER THAN 2.756″

.MAXIMUM TOOL MASS 11 LBS

.MAXIMUM TOOL MOVEMENT FROM GAGE TO LINE 3.9″

.SPINDLE TORQUE (15%ED/25%ED/CONT.) 49/37/22 N.m

.TOOL-SPINDLE COUPLING INDEX ANGLE 7.5 DEGREES

TURRET 2:

.NUMBER OF TOOLS ON TURRET 10

.SQUARE SHANK HEIGHT OF SINGLE POINT TOOL .79″

.SHANK DIAMETER BORING BAR 1.26″

FEEDRATES:

.RAPID TRAVERSE RATE IN M/MIN

X 40

Y 40

Z 50

TURRET 2 X 2 30

Z2 30

SPINDLE 2 A 36

MIN-1 B 100 C 250

MOTORS:

.SPINDLE 1 DRIVE MOTOR (40%ED/30MIN/CONT.) HP 15/15/10

.SPINDLE 2 DRIVE MOTOR (25%ED/CONT.) HP 10/7.5

.TOOL-SPINDLE DRIVE MOTOR 25%ED/CONT.) HP 12/7.4

.COOLANT PUMP MOTOR HP 1.62

.COOLANT PUMP MOTOR THRU SPINDLE HIGH PRESSURE COOLANT HP 1.39

.COOLANT PUMP MOTOR SPINDLE 1 HP 1.39

.COOLANT PUMP MOTOR TURRET 2 HP 1.39

.COOLANT PUMP MOTOR COOLING UNIT HP .7

TANK CAPACITIES:

.COOLANT TANK 79.2 GALLONS

.LUBRICANT TANK CAPACITY (OIL AIR/SHAFT LUBRICANT) .528/1.11 GALLONS

.SPINDLE OIL COOLER TANK CAPACITY 5.28 GALLONS

.HYDRAULIC UNIT TANK CAPACITY 5.28 GALLONS

.COOLANT COOLING TANK CAPACITY 50.69 GALLONS

.HIGH PRESSURE COOLANT TANK CAPACITY 35.11 GALLONS

MACHINE SIZE:

.94.48″ TALL

.REQUIRED FLOOR SPACE 95.47″ X 106.5″

.MACHINE WIEGHT WITHOUT UNLOADER 18,700 LBS

 

EQUIPPED WITH:

  • Fanuc control
  • Chip conveyor
  • In-machine Workpiece measuring
  • High pressure coolant unit
  • Bar feeder interface
  • Royal mist collector
  • Main spindle: Hainbuch 65MM quick change collet closer
  • Sub spindle: 3-jaw chuck (pictured 5C closer would be swapped)
  • 38 Tool ATC
  • 10 Station lower turret
© 2021 Protech Machine Tool Sales. All rights reserved.